Sony 3-298-969-11(1) 30 GB, Skip, Auto, Edit:, Fixed, labels, Speaker, Variable, AV Set-up, AV Preset, Equipment, AV2 Input, Audio Out, AV2 Output, TV Speaker, HDMI Set-up

AV Set-up	AV Preset	Assigns a name to equipment connected to the side and rear
		sockets. The name appears briefly on the screen when you
		select the equipment. You can skip input sources from
		connected equipment that you do not want displayed on the
		screen.
		1 Press F/f to select the desired input source, then press
		.
		2 Press F/f to select the desired option, then press .
		Equipment	Uses preset labels to assign a name to
		labels	connected equipment.
		Edit:	Allows you to create your own label.
			Press F/f to select the desired letter or
			number, then press g. Repeat this step
			until you complete the name, then select
			“OK” and press .
		Skip	Skips unnecessary input sources.

AV2 Input	Sets a signal to be input from the	/		/	AV2 socket.
	Usually, set to “Auto”.
	However, depending on the connected equipment, the signal
	may not be correctly detected even though “Auto” is selected.
	If the video from the equipment connected to the					/	/
	AV2 socket is not displayed correctly, select
	“Composite”, “S Video”, or “RGB” for the signal of the
	connected equipment.
AV2 Output	Sets a signal to be output to the	/	/		AV2 socket. If

		you connect a recorder or other recording equipment to the
		/	/	AV2 socket, you can record the output signal
		from other equipment connected to the TV.
		TV			Outputs TV broadcasts.
		Auto			Outputs whatever is being viewed on the
					screen (except signals from the		/
					COMPONENT IN, HDMI IN 1,
					HDMI IN 2, HDMI IN 3, and	/	PC
					IN sockets).
	Speaker	TV Speaker			Turns on and outputs the TV’s sound
					from the TV speakers.
		Audio System			Turns off the TV speakers and outputs the
					TV’s sound from external audio
					equipment connected to the audio output
					sockets on the TV.
					You can also turn on the connected
					equipment that is compatible with control
					for HDMI, after making the appropriate
					settings of control for HDMI.
	Audio Out	Variable			Allows you to use the TV’s remote to
					control audio output from an audio
					system connected to the TV.
		Fixed			The audio output of the TV is fixed. Use
					your audio receiver’s volume control to
					adjust the volume (and other audio
					settings) through your audio system.
HDMI Set-up	Allows the TV to communicate with equipment that is compatible with the control
	for HDMI function, and connected to the HDMI sockets of the TV. Note that
	communication settings must also be made on the connected equipment.

30 GB