There is no sound.
•Turn VOLUME +/– clockwise (or press VOLUME + repeatedly on the remote).
•Check the CROSS FADER slider position (page 31).
•Check the speaker connections (page 13).
•There is no audio output during Recording Timer.
There is no microphone sound.
•Turn VOLUME +/– clockwise (or press VOLUME + repeatedly on the remote) or turn MIC LEVEL clockwise to adjust the microphone volume.
•Make sure the microphone is connected to the MIC jack correctly.
There is severe hum or noise.
•A TV or VCR is placed too close to the unit. Move the unit away from the TV or VCR.
•Move the unit away from the source of noise.
•Connect the unit to a different wall outlet.
•Install a noise filter (commercially available) to the power cord.
•Turn off surrounding electrical equipment.
The timer does not function.
•Check the timer setting and set the correct time (page 38).
•Cancel the Sleep Timer function (page 38).
•You cannot select the Play Timer and the Recording Timer at the same time.
•Check the CROSS FADER slider position (page 31).
The remote does not function.
•Remove the obstacles between the remote and the unit.
•Move the remote closer to the unit.
•Point the remote at the unit’s sensor.
•Replace the batteries (R6/size AA).
•Move the unit away from the fluorescent light.
There is no sound output from the headphone.
•Turn i LEVEL clockwise to adjust the headphone volume.
•Check the headphone connection.
•Check that the audio source on the selected channel is played back.
There is beat sound even though you have not played back any source.
•Press BEAT ON/OFF to turn off beat pattern.
There is acoustic feedback.
•Reduce the volume.
•Move the microphone away from the speakers or change the direction of the microphone.
SpeakersSound comes from one channel or unbalanced left and right volume.
•Place the speakers as symmetrically as possible.
•Check that the speaker are connected securely and correctly.
•The source being played back is monaural.
There is no sound from the subwoofer.
•Adjust the subwoofer level to the appropriate level.
•Check that the subwoofer is connected securely and correctly.
•Check that the SYSTEM CONTROL jack on the unit is connected.
•Check that the power cord on the subwoofer is connected and the power is turned on.
Sound lacks bass.
•Check that the speaker’s + and – terminals are connected correctly.
Continued l