Symptom

Remedy

Picture noise appears.

• The disc is dirty or flawed.

 

• If the picture output from your system goes through your VCR to get to your

 

TV, the copy-protection signal applied to some DVD programs could affect

 

picture quality. If you still experience problems even when you connect your

 

control unit directly to your TV, try connecting your control unit to your TV’s

 

video input (page 19).

 

 

Even though you set the aspect

• The aspect ratio on the disc is fixed.

ratio in [TV TYPE] of [VIDEO

 

SETUP], the picture does not fill

 

the TV screen.

 

 

 

Color irregularity occurs on the

The front speakers in this system are magnetically shielded to prevent magnetic

TV screen.

leakage. However, some leakage may occur, as a high-strength magnet is

 

employed. If this happens, check the following items:

 

• If the speakers are used with a CRT-based TV or projector, install the speakers

 

at least 0.3 meters from the TV set.

 

• If the color irregularity persists, turn off the TV set once, then turn it on after 15

 

to 30 minutes.

 

• If howling occurs, reposition the speakers farther away from the TV set.

 

• Make sure that no magnetic object (magnetic latch on a TV stand, health care

 

device, toy, etc.) is placed near the speakers.

 

 

Sound

 

 

 

Symptom

Remedy

 

 

There is no sound.

• The speaker cord is not connected securely.

 

• Press MUTING on the remote if “MUTING” is displayed in the front panel

 

display.

 

• The system is in pause mode or in Slow-motion Play mode. Press H to return

 

to normal play mode.

 

• Fast forward or fast reverse is performed. Press H to return to normal play

 

mode.

 

• Check the speaker settings (page 79).

 

• The component connected to the HDMI OUT jack does not conform to the

 

audio signal format, in this case set [AUDIO (HDMI)] in [HDMI SETUP] to

 

[ON] (page 77).

 

 

No sound is output from the

• Set [AUDIO (HDMI)] in [HDMI SETUP] to [ON] (page 77).

HDMI OUT jack.

• The HDMI OUT jack is connected to a DVI (Digital Visual Interface) device

 

(DVI (Digital Visual Interface) jacks do not accept audio signals).

 

• Try the following: 1 Turn the system off and on again. 2 Turn the connected

 

component off and on again. 3 Disconnect and then connect the HDMI cable

 

again.

 

 

The left and right sounds are

• Check that the speakers and components are connected correctly and securely.

unbalanced or reversed.

 

 

 

Severe hum or noise is heard.

• Check that the speakers and components are connected securely.

 

• Check that the connecting cords are away from a transformer or motor, and at

 

least 3 meters away from your TV set or a fluorescent light.

 

• Move your TV away from the audio components.

 

• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with

 

alcohol.

 

• Clean the disc.

 

 

Information Additional

93GB