[1]Wireless flash photography with built-in flash of the camera

Use only an off-camera flash unit, using the light from the built-in flash as a signal.

Built-in flash

Flash unit

1Attach the flash unit to the camera and turn the power of the flash unit and camera on.

2Set the camera to wireless flash.

•The setting method differs depending on the camera used. For details, refer to the operating instructions of your camera.

•When the camera is set to wireless the flash is also set to wireless automatically, and WL is displayed on the LCD panel.

The flash channel information is transmitted to the camera.

•The light level can be changed even for the wireless flash mode. For details, refer to page 74.

3Remove the flash unit from the camera and raise the built-in flash.

4Set up the camera and flash unit.

•Set up the camera and flash unit in a dark location, such as indoors.

•See page 55 for details.

Applications

61