Setting wireless flash by flash only

Once you have performed the wireless flash setup in step [1], if you continue to use the same camera and flash combination without changing the wireless channel then you can also set the flash and camera separately to wireless.

Camera setting:

Set the camera to the wireless flash mode.

For details, refer to the operating instructions supplied with your camera.

Flash setting:

1Press the TTL/M button to display or .

•When selecting , the flash unit fires with the power level to be set.

2Press the MODE button repeatedly to display [WL].

3Press the Fn button.

4Press the g or G button to make [RMT] or [RMT2] blink.

5Press the Fn button.

•Make sure that the wireless channel of the off-camera flash is set to the same channel as the controller. For details on setting the wireless channel, see “Custom setting” (page 74).

Applications

63