Main
WARNING
Table of Contents
Getting Started
Playback Options
Tuner Functions
Surround Function
WARNING
Do not place any heated objects such as a hot pan or a kettle on the stand.
Do not step on the stand.
Do not subject the top glass panel to excessive shock.
Do not use the top glass panel if it is cracked.
CAUTION
On safety
On power sources
On placement
On operation
Precautions
On cleaning
Copyrights
Main features
BEasy connection with HDMI
BEasy operation with only one TV remote (BRAVIA Sync)
BEasy Surround settings
Inserting batteries into the remote
Supplied accessories
About the installation position
Preventing the TV from toppling over
1
2
3
Setting this stand
Installing the shelf board
1
2
Connecting the AM loop antenna (aerial)
1
3
The cords can be connected to either terminal.
4
Connecting the FM wire antenna (aerial)
1
For details, refer to pages 13 to 17.
2
3
4
Connecting components with HDMI jacks
Notes on HDMI connections
Connecting components without HDMI jacks
output of the connected component
Connect the AC power cord (mains lead) last.
Connecting the DIGITAL MEDIA PORT adapter
Front panel buttons and indicator
Playback Options
Index to parts and controls
Playback Options
Front panel display
About the indications in the front panel display
Remote control
Buttons for the operation of this stand
Buttons for the operation of a connected component through DMPORT connection
Playback Options
1
2 3
2
repeatedly until TV appears in the front panel display.
4
1
Turn the satellite/cable television tuner and stand on.
3
repeatedly until SAT/CATV appears in the front panel display.
4
1 2
3
4
5
Enjoying a connected component through DMPORT connection
1
2
3 4
5
A preset number appears in the front panel display.
1
2
3
To turn off the radio
To listen to non-preset radio stations
1
2
3 4
5 6
If you enter a wrong character
Using the Radio Data System (RDS)
Surround Function
Selecting the sound field
Press SOUND FIELD +/.
Surround Function
Enjoying the surround effect
SOUND FIELD +/
Available sound fields
Surround Function
Enjoying the sound at low volume (NIGHT mode)
NIGHT
Press NIGHT.
To cancel the night mode, press NIGHT again.
You can listen to Dolby Digital soun d at low volume by using AUDIO DRC (page38).
1
2
3
BRAVIA Sync Features
What is BRAVIA Sync?
4
If SCANNING or COMPLETE does not appear after performing the steps above
2
3
4
6
7
If you add or reconnect the component
Setting the Control for HDMI function to off
2
3
press or c.
4
Play back a connected component.
2
3
4
Enjoying the TV sound from the stand
(System Audio Control)
2
3
4
Turning off the stand, TV and the connected compornents
(System Power Off)
Page
Using the AMP menu
You can set the following items with AMP MENU on the remote. The default settings are underlined.
1
2
3
The following pages show details for each setting.
Advanced Settings
2
3
Adjusting the delay between the sound and the image (A/V SYNC)
2
3
Enjoying Dolby Digital sound at low volume (AUDIO DRC)
2
DRC appears, then press or c.
3
Changing the display setting (DISPLAY)
You can change the display setting.
2
3
front panel display.
Advanced Settings
Using the sleep timer
2
3
want.
The minutes display (remaining time) changes as follows:
This function is only for this stand, not for the connected TV or other components.
Troubleshooting
Control for HDMI
OTHER
Use buttons on the stand for the operation.
1 2
SELECTOR and VOLUME .
Specifications
Formats supported by this stand
Digital input formats supported by this stand are as follows.
Amplifier section
Tuner section
HDMI section
Glossary
Page
Index
