Sony 4-129-925-11(1), RHT-G950 2, 3, 2, 3

37GB

Advanced Settings

Enjoying multiplex broadcast

sound (DUAL MONO)

You can enjoy multiplex broadcast sound when

the stand receives an AC-3 multiplex broadcast

signal.

•To receive AC-3 signal, you need to connect a digital

satellite tuner to the stand with an optical cable or

coaxial cable, and set the digital output mode of the

digital satellite tuner to AC-3.

1Press AMP MENU.

2Press X/x repeatedly until “DUAL

MONO” appears, then press or c.

3Press X/x to select the sound you want.

• MAIN: Plays back only the main

channel.

• SUB: Plays back only the sub

channel.

• MAIN/SUB: Main sound is output from

the left speaker and sub

sound is output from the

right speaker.

4Press AMP MENU.

The AMP menu turns off.

Adjusting the delay between

the sound and the image (A/V

SYNC)

You can delay the sound using this function

when the image is slower than the sound.

1Press AMP MENU.

2Press X/x repeatedly until “A/V SYNC”

appears, then press or c.

3Press X/x to select the setting.

• OFF: Does not adjust.

• ON: Adjusts the difference between

picture and sound.

4Press AMP MENU.

The AMP menu turns off.

•You may not be able to adjust the delay between

sound and image perfectly using this function.

•This function is useful only for Dolby Digital, DTS

and Linear PCM (2ch) input by coaxial (audio),

optical (audio) or HDMI.

Note

VOLUME

MUTING

TUNING

-

PRESET

-

NIGHT

DISPLAY

CENTER SUBWOOFER

INPUT SELECTOR

AMP MENU

LEVEL

DIMMER

TUNING+

PRESET+

RETURN

MENU

SOUND FIELD

AMP

MENU

C, X, x, c,

Notes

VOLUME

MUTING

TUNING

-

PRESET

-

NIGHT

DISPLAY

CENTER SUBWOOFER

INPUT SELECTOR

AMP MENU

LEVEL

DIMMER

TUNING+

PRESET+

RETURN

MENU

SOUND FIELD

AMP

MENU

C, X, x, c,

continued

Contents

Main WARNING Table of Contents Getting Started Playback Options Tuner Functions Surround Function WARNING Do not place any heated objects such as a hot pan or a kettle on the stand. Do not step on the stand. Do not subject the top glass panel to excessive shock. Do not use the top glass panel if it is cracked. CAUTION On safety On power sources On placement On operation Precautions On cleaning Copyrights Main features BEasy connection with HDMI BEasy operation with only one TV remote (BRAVIA Sync) BEasy Surround settings Inserting batteries into the remote Supplied accessories About the installation position Preventing the TV from toppling over 1 2 3 Setting this stand Installing the shelf board 1 2 Connecting the AM loop antenna (aerial) 1 3 The cords can be connected to either terminal. 4 Connecting the FM wire antenna (aerial) 1 For details, refer to pages 13 to 17. 2 3 4 Connecting components with HDMI jacks Notes on HDMI connections Connecting components without HDMI jacks output of the connected component Connect the AC power cord (mains lead) last. Connecting the DIGITAL MEDIA PORT adapter Front panel buttons and indicator Playback Options Index to parts and controls Playback Options Front panel display About the indications in the front panel display Remote control Buttons for the operation of this stand Buttons for the operation of a connected component through DMPORT connection Playback Options 1 2 3 2 repeatedly until TV appears in the front panel display. 4 1 Turn the satellite/cable television tuner and stand on. 3 repeatedly until SAT/CATV appears in the front panel display. 4 1 2 3 4 5 Enjoying a connected component through DMPORT connection 1 2 3 4 5 A preset number appears in the front panel display. 1 2 3 To turn off the radio To listen to non-preset radio stations 1 2 3 4 5 6 If you enter a wrong character Using the Radio Data System (RDS) Surround Function Selecting the sound field Press SOUND FIELD +/. Surround Function Enjoying the surround effect SOUND FIELD +/ Available sound fields Surround Function Enjoying the sound at low volume (NIGHT mode) NIGHT Press NIGHT. To cancel the night mode, press NIGHT again. You can listen to Dolby Digital soun d at low volume by using AUDIO DRC (page38). 1 2 3 BRAVIA Sync Features What is BRAVIA Sync? 4 If SCANNING or COMPLETE does not appear after performing the steps above 2 3 4 6 7 If you add or reconnect the component Setting the Control for HDMI function to off 2 3 press or c. 4 Play back a connected component. 2 3 4 Enjoying the TV sound from the stand (System Audio Control) 2 3 4 Turning off the stand, TV and the connected compornents (System Power Off) Page Using the AMP menu You can set the following items with AMP MENU on the remote. The default settings are underlined. 1 2 3 The following pages show details for each setting. Advanced Settings 2 3 Adjusting the delay between the sound and the image (A/V SYNC) 2 3 Enjoying Dolby Digital sound at low volume (AUDIO DRC) 2 DRC appears, then press or c. 3 Changing the display setting (DISPLAY) You can change the display setting. 2 3 front panel display. Advanced Settings Using the sleep timer 2 3 want. The minutes display (remaining time) changes as follows: This function is only for this stand, not for the connected TV or other components. Troubleshooting Control for HDMI OTHER Use buttons on the stand for the operation. 1 2 SELECTOR and VOLUME . Specifications Formats supported by this stand Digital input formats supported by this stand are as follows. Amplifier section Tuner section HDMI section Glossary Page Index