8GB
Please check the following accessories in the
package.
Optical cable (1)
Remote commander (RM-ANU032) (1)
Size AA (R6) batteries (2)
Screw for the support belt (1)
Cable ties (2)
Shelf board (1)
Shelf support pins (4)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Operating Instructions (1)

Inserting batteries into the

remote

You can control the stand using the supplied
remote. Insert two size AA (R6) batteries by
matching the + and – ends on the batteries to the
markings inside the compartment.
•Do not leave the remote in an extremely hot or humid
place.
•Do not use a new battery with an old one.
•Do not drop any foreign object in to the remote casing,
particularly when replacing the batteries.
•Do not expose the remote sensor to direct light from
the sun or lighting apparatus. Doing so may cause a
malfunction.
•If you do not intend t o use the remote for an extended
period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.

Getting Started

Supplied accessories
Notes