Applications
61
[1] Wireless flash photography with
built-in flash of the camera
Use only an off-camera flash unit, using the light from the built-in flash as a signal.
1Attach the flash unit to the camera and turn the power
of the flash unit and camera on.
2Set the camera to wireless flash.
• The setting method differs depending on the camera used. For details, refer
to the operating instructions of your camera.
• When the camera is set to wireless the flash is also set to wireless
automatically, and WL is displayed on the LCD panel.
The flash channel information is transmitted to the camera.
• The light level can be changed even for the wireless flash mode. For details,
refer to page74.
3Remove the flash unit from the camera and raise the
built-in flash.
4Set up the camera and flash unit.
• Set up the camera and flash unit in a dark location, such as indoors.
• See page55 for details.
Built-in flash
Flash unit