Sony 480 Fine Tuning The Polaris Cleaner, Routine Maintenance, Thrust Jet Adjustment, English

English

Fine Tuning The Polaris Cleaner

When operating correctly, the Polaris 480 vacuums, sweeps and scrubs all surfaces randomly throughout the pool. The climbing ability of the Polaris depends on the pool’s shape and water pressure or flow. The Polaris climbs best in pools without sharp angles or curves in the transition from the pool floor to the pool wall.

Approximately every 3 minutes the Polaris 480 goes into back-up mode. This action pulls the Polaris away from pool obstacles and increases its random pattern.

Thrust Jet Adjustment

The thrust jet powers the direction of the Polaris. Factory position is straight back, but depending on the pool, other settings

are helpful.

ft

Pu

s

h

e

e

it

L

n

s

U

U

s

n

t

e

se

s

C

i

R

h

a

li

i

s

e

m

r

g

P

u

n

n

h

I

12

g

t

9

3

Sweep Hose Adjustment

The sweep hose should move in a gentle sweeping motion. To increase

D				6			g
e							in
	c						b
		r
		e	a			m
					li
				ses C

or decrease the motion of the sweep hose, turn off the booster pump and change the sweep hose settings.

There are five easy-click settings located at the back of the cleaner.

See Troubleshooting for other action adjustments.

Routine Maintenance

Sweep Hose Settings

Sweep Hose Jet

Thrust Jet

Cleaning the All-Purpose Filter Bag

Depress the bag clasp to free the bag from the feed hose. Depress the prongs to release the bag from the cleaner. Open the bag closure and remove the debris.

Zipper Closure

Whenever possible, empty the filter bag when it is half full, especially if the dirt load is sand.

It is easier to empty the filter bag when it is dry. Alternate between two filter bags. When one becomes full, remove it and put on the clean bag.

www.polarispool.com