15
Setting up your TV
Running initial setup
1Complete your cable connections
before proceeding with the Initial
Setup.
Connect the TV to your nearest power
outlet.
2Check the ENERGY SAVING
SWITCH setting is on (z).
3Press 1 (POWER) on the TV.
When you switch the TV on for the
first time, the Language menu
appears on the screen.
~
•The TV image shown here may differ from
your TV but the operation of your TV remains
the same as indicated.
4Follow the instructions on the screen.
~
•The ENERGY SAVING SWITCH must be on
(z) to set the clock and obtain program
information for the TV Guide.
•Home mode sets the TV to display the settings
optimized for home viewing (this setting is
ENERGY STAR compliant).
5Select Continue to scan for available
channels and enable the TV Guide
On Screen® feature. If you receive
channels from a cable box or satellite
receiver and do not wish to use the
TV’s built-in tuner, select Skip.
Selecting Skip will disable the TV
Guide On Screen feature, which is
only available when the TV’s tuner is
used.
~
•If you skip the channel scan while in the setup
menus, TV Guide will be disabled.
Detaching the Table-Top
Stand from the TV
Remove only the screws marked with on
the TV.
~
•Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
For KDL-60NX801, KDL-60/52/
46NX800 and KDL-46/40NX700
~
•The NX801/NX800/NX700 series models
must remove the stand rear cover prior to
detaching the Table-Top Stand.
•When installing the TV on a wall, remove the
four screws from the rear of the TV. (They are
fastened in the screw holes for wall mounting.)
Be sure to store the removed screws in a safe
place, keeping them away from children
(except KDL-46/40NX700).
•When attaching the Table-Top Stand again, be
sure to fasten the four screws (previously
removed) to the original holes on the rear of
the TV (except KDL-46/40NX700).
For KDL-55NX811, KDL-60/55/
46NX810, KDL-46/40NX711 and
KDL-46/40NX710
KDL-60NX810
Joint