7
Setting up your TV
3After all the screws are tighten cover
the Table-Top Stand with the
supplied Stand Rear Cover.
For KDL-55NX811, KDL-60/55/
46NX810, KDL-46/40NX711 and
KDL-46/40NX710
1Align with the two dowels of the
Table-Top Stand, and gently place
the TV, checking the f mark is
facing the front.
2Attach the TV and Table-Top Stand
with the supplied screw and hexagon
wrench.
~
•Set the torque setting to approximately 3 N·m
{30 kgf·cm}.
Reattaching the Table-Top Stand to
the TV
Attach to the original position using the
removed screws. See “Detaching the Table-
Top Stand from the TV” (page15).
(Continued)