Installing the software

Installing Audio Player for Adapter to your CLIÉ handheld

Install the Audio Player for Adapter to your CLIÉ handheld by the procedures below.

Note

Make sure that your CLIÉ handheld and computer can operate HotSync by attaching your CLIÉ handheld to the cradle or the USB cable before installing the software. For details on how to connect your CLIÉ handheld and your computer, and how to operate HotSync, refer to the Operating Instructions of the CLIÉ handheld.

1 Insert the installation CD-ROM supplied with Audio Adapter PEGA-SA500 into the CD-ROM drive of your computer.

The setup program starts automatically.

2 Click [Install Audio Adapter system files].

3 Install the Audio Player for Adapter following the displayed instructions.

Select the model of your CLIÉ handheld on the model selection screen.

Notes

•If you use multiple models, install the software for each model.

•Select the model name of your CLIÉ handheld on the select user name screen.

4 Click [Finish] on the screen to complete the installation.

Audio Player for Adapter is transferred to CLIÉ (Sony PDA) Palm Desktop software.

5 Connect your CLIÉ handheld to the computer by the cradle or the USB cable and perform the HotSync.

Audio Player for Adapter is installed to your CLIÉ handheld.

6 Perform soft-reset of your CLIÉ handheld following the displayed instructions.

6