Step 3: TV and Video Component Hookups

Step 3: TV and Video Component Hookups

Required cords

S Video cord for connecting a TV monitor

Audio cords (not supplied)

When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the components.

White (L/audio)

White (L/audio)

Red (R/audio)

Red (R/audio)

Jacks for connecting video components

Connect a

To the

TV monitor

MONITOR (S VIDEO OUT) jack

VCR

VIDEO (S VIDEO/ANALOG L/R IN/OUT) jacks

Digital satellite receiver

TV/SAT (S VIDEO/ANALOG L/R IN) jacks

zWhen using the COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR) instead of the S Video jacks

Your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR). If your TV accept progressive format signals, you must use this connection and set “COMPONENT OUT” to “PROGRESSIVE” in “SCREEN SETUP” (page 67).

Notes

When you select VIDEO using the FUNCTION button, the signal is output from the front L/R speakers, but not from the VIDEO (S VIDEO/ANALOG L/R OUT) jacks.

When you use the Video line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH STEREO mode, the line outputs may not function properly.

When the mode of the receiver is not set to “DVD,” no signal is output from the COMPONENT VIDEO OUT jacks.

When the mode of the receiver is set to DVD and “INTERACE” is selected in “SCREEN SETUP,” the signal is output from the MONITOR or COMPONENT VIDEO OUT jacks.

When the mode of the receiver is set to “DVD” and “PROGRESSIVE” is selected in “SCREEN SETUP,” the signal is output only from the COMPONENT VIDEO OUT jacks.

22US

Page 22
Image 22
Sony AVD-S50ES TV and Video Component Hookups, 22US, Required cords, Jacks for connecting video components, Connect a