Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony AVJ-X55 (V), (S), (C), Tips, Rear of TV, (not supplied), (not supplied), Rear of DVD Receiver

1 40

Download 40 pages, 1.81 Mb

Connections

Connecting to a TV

Make one of the following connections, depending on the capabilities of your existing equipment.

Tips

Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD Receiver. Use one of the connec- tions described below.

Please refer to the manuals of your TV, VCR or other devices as necessary to make the best connections.

–Make sure the DVD Receiver is connected directly to the TV. Select the correct AV input on your TV.

–Do not connect your DVD Receiver to TV via your VCR. The DVD image could be distorted by the copy protection system.

Video connection

Connect the MONITOR OUT VIDEO jack on the DVD Receiver to the video in jack on the TV using the video cable (V).

S-Video connection

Connect the S-VIDEO OUT jack on the DVD Receiver to the S-Video in jack on the TV using the S-Video cable (S).

Component Video (Color Stream® ) connection

Connect the COMPONENT VIDEO OUT jacks on the DVD Receiver to the corresponding in jacks on the TV using an Y Pb Pr cable (C).

PREPARATION

Rear of TV

S-VIDEO	VIDEO	COMPONENT VIDEO INPUT
INPUT	INPUT	COMPONENT VIDEO INPUT
	L	Y	Pb	Pr
	L

S				V		C


(not supplied)
(not supplied)					(not supplied)

VIDEO

S VIDEO

(DVD ONLY)

	Y	PB/CB	PR/CR
MONITOR OUT	COMPONENT VIDEO OUT

Rear of DVD Receiver

11

Contents

© 2004 Sony Corporation WARNING: CAUTION: This DVD Receiver employs a Laser System Precautions Safety NOTES ON COPYRIGHTS: Note Tip Safety Precautions Table of Contents Before Use Front Panel Controls Display Window Indicators DVD video discs (8 cm / 12 cm disc) Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) Notes Handling the unit When shipping the unit When setting up the unit To keep the exterior surfaces clean Cleaning the unit @/ 1 (POWER) indicator STANDBY indicator Disc Tray STOP (x) PAUSE (X) PRO LOGIC OPEN/CLOSE TV/VIDEO 0-9numerical buttons >10/ TV ENTER Playback Control Buttons Remote Control Operation Range Remote control battery installation Tips (V) (S) (C) Rear of TV (not supplied) Connection Connect the supplied FM/AM antenna for listening to the radio Connect the AM Loop antenna to the AM LOOP connector Connect the FM antenna to the FM 75 Ω connector Connect the speakers using the supplied speaker cords This ferrite core can reduce noises How to attach the ferrite core 1Press the stopper [a] of the ferrite core to open 3Pass the others straight on the other ferrite core •Front speakers •Centre speaker •Surround speakers •Subwoofer Speaker Positioning Example FUNCTION TUNER BAND •CD/DVD To view output from the DVD: DTS DOLBY DIGITAL DOLBY PRO LOGIC Use this mode when playing movie or Dolby Digital 2 channel A.F.D. AUTO 1Press DVD DISPLAY during playback 3The number buttons can also be used for setting Temporary Feedback Field Icons TITLE Repeat Title CHAPT Repeat Chapter Press DVD SETUP The Setup menu appears You can set your personal preferences on the DVD function mode Press DVD SETUP, RETURN, or H (PLAY) to 5 exit the setup menu 5.1 Speaker settings DVD The DRC and PBC settings can be changed Dynamic Range Control (DRC) *1: Dolby Digital only Playback Control (PBC) Rating DVD 1 Select Rating on the setup menu using V/v buttons on the setup menu 2While Rating is selected, press b Enter a 4-digit Playback Setup DVD VCD2.0 VCD1.1 1Press Z to open the disc tray press H (PLAY) If a menu screen is displayed A menu screen may appear automatically after loading a DVD Slow Motion DVD VCD2.0 VCD1.1 1Press (PAUSE) during playback The DVD Receiver will now go into PAUSE mode 2Press SLOW t or T during pause mode DVD MENU 1Press DVD TOP MENU or DVD MENU Press ANGLE repeatedly during playback to select a desired angle DVD D 3Press ENTER Disc CD MP3 Before playing MP3 disc, read the notes on MP3 files on right 1Audio CD: Audio CD menu appears on the TV screen go to step Audio CD: MP3 disc: Page Insert a disc and close the tray 1 The MP3/JPEG select menu appears on the TV screen Use V/v to select the JPEG then press ENTER The JPEG menu appears on the TV screen menu CD VCD2.0 VCD1.1 MP3 Program can contain 30 tracks 1mode Press PROGRAM to exit the Program Edit mode; the mark will disappear Adjust the following settings for the built-in5.1 channel surround decoder Select “5.1 Speaker Setup” using the V/v 2 buttons on the setup menu While “5.1 Speaker Setup” is selected You can set the DVD Receiver to turn off automatically at a specified time 1Press SLEEP to set the desired sleep time The SLEEP indicator and sleep time appears in the dis- play window 2Each time you press SLEEP the setting changes in the following order SLEEP 90 → 80 → 70 → 60→ 50 → 40 → 30 → 20 → 10 → 1Load a karaoke disc 2level to prevent acoustic feedback (e.g. a 3 Connect a microphone to MIC socket. (3.5mm) 4Press PLAY to start playback 5Adjustsong. MIC VOL control and then sing a And then every time you press FM and AM (MW) changes alternately Scanning stops when the DVD Receiver tunes in a Press TUNER MENU on the remote control 4 A preset number will flash in the Display Window TV @ TV/VIDEO Number buttons TV ENTER TV CH + TVTip Language Page Symptom Cause Correction Page [FM] [Supplied ❋Designs and specifications are subject to change without notice Sony Corporation