Connections (Continued)

Speaker System Connection

Connect the speakers using the supplied speaker cords.

To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.).

Notes

Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack base.

If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.

Do not disassemble the front covers of supplied speakers.

Speaker stand is optional.

About Ferrite Core

Be sure to attach the ferrite core to the speaker cables (for connecting to this unit).

This ferrite core can reduce noises.How to attach the ferrite core1Press the stopper [a] of the ferrite core to open.

2Wind the Subwoofer cable once on the ferrite core. Wind the Center cable once on the ferrite core.

3Pass the others straight on the other ferrite core.4Close the ferrite core unitl it clicks.

Notes

Take care not to pinch the speaker cables between the ferrite cores.

Attach the ferrite core near the unit (Refer to the fig.3 and comment.).

1

a

a

2

3

The length here is short as much as possible.

14