Step 7: Easy Setup
Follow the steps below to make the minimum number of basic adjustments for using the player. If you do not complete Easy Setup, it will appear each time you turn on your player.
Make the settings below in the following order.
When turned on for the first time
Wait for a short while before the player turns on and starts Easy Setup.
[/1
TV [/1
| </M/m/,, |
RETURN | ENTER |
| |
HOME |
|
1 Turn on the TV.
2 Press [/1 to turn on the player.
The player turns on after a moment.
3 Switch the input selector on your TV so that the signal from the player appears on your TV screen.
The display for OSD language selection appears.
•If the display for OSD language selection does not appear
Press HOME, and select “Easy Setup” in the “Setup” setup (page 53). Then, select “Start,” and press ENTER.
4 Select a language for the
ENTER.
The initial settings message appears.
5 Select “Start,” and press ENTER.
6 Select the cable type used to connect the player and your TV, and press
ENTER.
Select “HDMI” when connecting your TV using the HDMI cable, and go to step 7.
b
When connecting the HDMI OUT jack and other video output jacks at the same time, select “Component Video.”
Select “Component Video” when connecting your TV using the component video cable, and go to step 7.
Select “Video or S Video” when connecting your TV using the video cable or
28