55
Settings and Adjustments
7Select “Save & Connect,” and press
ENTER.
The network diagnostic starts. Results
are displayed after the player finishes the
network diagnostic. If an error message
appears, follow the on-screen
instructions.
For further details, visit the following
website and check the FAQ contents:
http://www.sony.com/blurayupdate/
8Select “OK,” and press ENTER.
To enter characters
The display for entering characters appears
when you select “Proxy Server” in the pr oxy
server setting.
1Press a number button repeatedly to
select a character.
Example:
Press the number 3 button once to enter
“d.”
Press the number 3 button three times to
enter “f.”
To switch the keyboard to upper case,
lower case, numbers, or symbols, select
“abc,” and press ENTER repeatedly.
2Press ,, and enter the next character.
3Press the green button (“Enter”) to finish.
Available buttons
You can run the network diagnostic.
1Select “Network Connection
Diagnostics” in “Network Settings,”
and press ENTER.
2Select “Start,” and press ENTER.
The network diagnostic starts.
Results are displayed after the player
finishes running the network diagnostic.
If an error message appears, follow the
on-screen instructions and perform
“Network Connection Diagnostics”
again.
3Select “Finish,” and press ENTER.
Buttons Details
Red button
(Delete)
Deletes the character to the
left of the cursor.
Green button
(Enter)
Sets the input and finishes
the setting.
</,Moves the cursor.