F:\SD0004_A1L\FINAL\4261827311_GB\42618
27311\4261827311_GB\GB_040BAS.fm
master page=right
specdef20090918
BDP-S280
4-261-827-31(1)
11
Hookups and Settings
Step 2: Easy Setup
1Insert two R6 (size AA) batteries by
matching the 3 and # ends on the
batteries to the markings inside the
battery compartment.
2Plug the player into the mains.
3Press [/1 to turn on the player.
4Turn on the TV, then switch the input
selector on your TV so that the signal
from the player appears on your TV
screen.
5Perform [Easy Setup].
Follow the on-screen instructions to
make the basic settings using </M/m/
, and ENTER on the remote.
Connecting to the Network
Use a LAN cable to connect to the LAN (100)
terminal on the player.
z
Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.
To set the network settings
Select [Network Settings], [Internet
Settings], then [Wired Setup] (page18), and
follow the on-screen instructions to complete
the setup.
Turn off the player, then connect the USB
Wireless LAN Adapter (UWA-BR100 only
available as of October 2010) to the USB jack
on the player.
b
The USB Wireless LAN Adapter may not be
available in some regions/countries.
To set the network settings
Select [Network Settings], [Internet
Settings], then [USB Wireless Setup]
(page18), and follow the on-screen
instructions to complete the setup.
When turned on for the first time
Wait for a short while before the player
turns on and starts [Easy Setup].
to mains
ENTER
</M/m/,

Wired Setup

USB Wireless Setup

ADSL modem/
Cable modem
Broadband
router
LAN cable
(not supplied)
Internet
LAN cable (not supplied)
Wireless LAN
router
ADSL modem/
Cable modem
Internet
USB Wireless LAN Adapter