Step 6: Preparing the Remote
You can control the player using the supplied remote. Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment. When using the remote, point it at the remote sensor 
on the player (page 10).
b
Controlling TVs with the remote
You can control the volume, input source, channel, and power switch of your Sony TV with the supplied remote.
b
When you replace the batteries of the remote, the code number may be reset to the default setting. Set the appropriate code number again.
TV [/1
Number buttons
• Use the batteries correctly to avoid possible |
leakage and corrosion. Should leakage occur, do |
not touch the liquid with bare hands. Observe the |
following: |
– Do not use a new battery with an old battery, or |
batteries of different manufacturers. |
– Do not attempt to recharge the batteries. |
– If you do not intend to use the remote for an |
extended period of time, remove the batteries. |
MUTING
INPUT
– If battery leakage occurs, wipe out any liquid | |
inside the battery compartment, and insert new | |
batteries. |
|
• Do not expose the remote sensor (marked | on |
the front panel) to strong light, such as direct |
|
sunlight or a lighting apparatus. The player may | |
not respond to the remote. |
|
VOL +/– | CH +/– |
Available buttons
Depending on the connected unit, you may not be able to control your TV with some or all of the buttons (TV [/1, CH
Buttons | Operations |
TV [/1 | Turns your TV on or off. |
|
|
VOL (volume) | Adjusts the volume of |
+/– | your TV. |
|
|
CH (channel) | Selects the channel on |
+/– | your TV. |
|
|
INPUT | Switches your TV’s input |
(input select) | source between the TV |
| and other input sources. |
|
|
MUTING | Mutes the sound. |
|
|
26