72US
Specifications
Amplifier Section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R: With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated 60 watts
per channel minimum
RMS power, with no more
than 1% total harmonic
distortion from 250 milli
watts to rated output.
Other models:
POWER OUTPUT (rated)
Front L/Front R: 108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
BDV-E370/BDV-T37:
POWER OUTPUT (reference)
Front L/Front R/Center/Surround L/Surround R:
142 W (per channel at 3
ohms, 1 kHz)
Subwoofer: 140 W (at 3 ohms, 80 Hz)
BDV-E870/BDV-E570/BDV-E470/BDV-T57:
POWER OUTPUT (reference)
Front L/Front R/Center/Surround L/Surround R:
167 W (per channel at 3
ohms, 1 kHz)
Subwoofer: 165 W (at 3 ohms, 80 Hz)
Inputs (Analog)
AUDIO (AUDIO IN) Sensitivity: 450/250 mV
Inputs (Digital)
SAT/CABLE (COAXIAL), TV (OPTICAL)
Supported formats: LPCM
2CH (up to 48 kHz), Dolby
Digital, DTS
Video Section
Outputs VIDEO: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
HDMI OUT: Type A (19
pin)
BD/DVD/Super Audio CD/CD System
Signal format system NTSC
USB Section
(USB) port: Type A (For connecting
USB memory, memory
card reader, digital still
camera, and digital video
camera)
Maximum current: 500 mA
LAN Section
LAN (100) terminal 100BASE-TX Terminal
Tuner Section
System PLL quartz-locked digital
synthesizer
FM tuner section
Tuning range
North American models: 87.5 MHz - 108.0 MHz
(100 kHz step)
Other models: 87.5 MHz - 108.0 MHz
(50 kHz step)
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
Speakers
Front/Surround (SS-TSB101) for BDV-E570/
BDV-E470/BDV-E370/BDV-T57/BDV-T37
Surround (SS-TSB101) for BDV-E870
Speaker system Full range Bass reflex
Speaker unit 55 mm × 80 mm (2 1/4 in ×
3 1/4 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 75 mm × 225 mm × 71 mm
(3 in × 8 7/8 in × 2 7/8 in)
(w/h/d)
Mass (approx.) 0.45 kg (1 lb)
Front (SS-TSB104) for BDV-E870
Speaker system Full range Bass reflex
Speaker unit 55 mm × 80 mm (2 1/4 in ×
3 1/4 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 75 mm × 610 mm × 70 mm
(3 in × 24 1/8 in × 2 7/8 in)
(w/h/d) (wall-mounted
part)
251 mm × 1,205 mm × 251
mm (10 in × 47 1/2 in ×
10 in) (w/h/d) (whole
speaker)
Mass (approx.) 0.9 kg (2 lb) (wall-
mounted part)
2.7 kg (6 lb) (whole
speaker)
Center (SS-CTB101)
Speaker system Full range Acoustic
suspension, Magnetically
Shielded
Speaker unit 30 mm × 60 mm (1 3/16 in ×
2 3/8 in) cone type
Rated impedance 3 ohms