17GB
Getting Started
Caution
•Contact a screw shop or installer regarding the wall material or screws to be used.
•Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
•Sony is not responsible for accidents or dama ge caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
Required preparation for BDV-F500
You cannot install the speaker with the speaker stand attache d. Be sure to remove the speaker stand
before installing the speaker on a wall.
1Remove the screws (pre-installed) at the bottom of the speaker.
These screws are used when reassembling the speaker. Be sure not to lose the screws.
2Detach the speaker stand.
When installing the speakers on a wall
Screws