19GB
Getting Started
1Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
Note
•The length and type of the screw are examples. Select screws in accordance with the material or strength of
the wall to which you install the speakers.
2Fasten the screws to the wall.
3Hang the speakers on the screws.
Note
•Be careful not to pinch the speaker cords while tight ening the screws.
30 mm
4 mm
Hole on the back of
the speaker
5 mm
10 mm
8 to 10 mm
5 mm
10 mm
Hole on the back of
the speaker
Rear of the speaker