Sony IZ1000W, BDV-HZ970W Specifications

78US

Specifications

Amplifier Section

U.S. models:

POWER OUTPUT AND TOTAL HARMONIC

DISTORTION:

(FTC)

Front L + Front R: With 3 ohms loads, both

channels driven, from

180 Hz - 20,000 Hz; rated

60 W per channel

minimum RMS power,

with no more than 1% total

harmonic distortion from

250 milli watts to rated

output.

Other models:

POWER OUTPUT (rated)

Front L + Front R: 105 W + 105 W (at 3 ohms,

1 kHz, 1% THD)

POWER OUTPUT (reference)

Front L/Front R/Center: 167 W (per channel at 3

ohms, 1 kHz)

Subwoofer: 165 W (at 3 ohms, 80 Hz)

Inputs (Analog)

AUDIO (AUDIO IN) Sensitivity: 450/250 mV

Inputs (Digital)

DIGITAL IN (SAT/CABLE COAX), DIGITAL IN

(TV OPT)

Supported formats: LPCM

2CH (up to 48 kHz), Dolby

Digital, DTS

Video Section

Outputs VIDEO: 1 Vp-p 75 ohms

COMPONENT:

Y: 1 Vp-p 75 ohms

PB/CB, PR/CR: 0.7 Vp-p

75 ohms

HDMI Section

Connector Type A (19pin)

Video inputs HDMI (IN 1), HDMI (IN

2):

640 × 480p@60 Hz

720 × 480i@59.94/60 Hz

720 × 480p@59.94/60 Hz

1280 × 720p@59.94/60 Hz

1920 × 1080i@59.94/

60 Hz

1920 × 1080p@59.94/

60 Hz

720 × 576i@50 Hz

720 × 576p@50 Hz

1280 × 720p@50 Hz

1920 × 1080i@50 Hz

1920 × 1080p@50 Hz

1920 × 1080p@24 Hz

BD/DVD/Super Audio CD/CD System

Signal format system NTSC

USB Section

(USB) port: Type A (For connecting

USB memory, memory

card reader, digital still

camera, and digital video

camera)

Maximum current: 500 mA

LAN Section

LAN (100) terminal 100BASE-TX Terminal

Tuner Section

System PLL quartz-locked digital

synthesizer

FM tuner section

Tuning range 87.5 MHz - 108.0 MHz

(100 kHz step)

Antenna (aerial) FM wire antenna (aerial)

Antenna (aerial) terminals 75 ohms, unbalanced

Intermediate frequency 10.7 MHz

Speakers

Front (SS-TSB102) for BDV-HZ970W

Speaker system Full range Bass reflex

Speaker unit 55 mm × 80 mm (2 1/4 in ×

3 1/4 in) cone type

Rated impedance 3 ohms

Dimensions (approx.) 75 mm × 610 mm × 70 mm

(3 in × 24 1/16 in × 2 7/8 in)

(w/h/d) (wall-mounted

part)

Floor: 250 mm × 1,000

mm × 250 mm (9 7/8 in ×

39 3/8 in × 9 7/8 in) (w/h/d)

(whole speaker)

Desktop: 250 mm × 727

mm × 250 mm (9 7/8 in ×

28 5/8 in × 9 7/8 in) (w/h/d)

(whole speaker)

Mass (approx.) 0.9 kg (2 lb) (wall-

mounted part)

Floor: 2.0 kg (4 lb 7 oz)

(whole speaker)

Desktop: 1.9 kg (4 lb 3 oz)

(whole speaker)

Contents

Main WARNING CAUTION Precautions On watching 3D video images For the customers in the U.S.A. CAUTION Important Safety Instructions For the customers in Canada For the wireless transceiver (EZW- RT10/EZW-RT10A) (For the customers in the U.S.A.) For the wireless transceiver (EZW- RT10/EZW-RT10A) (For the customers in Canada) For the USB Wireless LAN Adapter (UWA- BR100) Copyrights and Trademarks About These Operating Instructions Table of Contents Getting Started Playback Sound Adjustment Tuner Unpacking BDV-HZ970W BDV-IZ1000W Page Index to Parts and Control Front panel Front panel display About the indications in the front panel display Rear panel A"/1 (Power) Turns the surround amplifier on/off. BS-AIR/STANDBY indicator CS-AIR ID switch Surround amplifier Remote control 2 qa wa 1 3 Page Step 1: Installing the System Getting Started AA Positioning the speakers A To add the optional surround back speakers CC 45 45 30 30 For assembling the speakers, refer to Speaker Installation Guide (supplement). Assembling the speakers When installing the speakers on a wall 1 See the illustrations below. 2 BDV-IZ1000W BDV-HZ970W 3 Step 2: Connecting the System To connect speaker cords to the unit and surround amplifier Connecting the speakers Method 1: HDMI cable (A) connection Method 2: Component video cable (B) connection Connecting the TV (Video connection) About Audio Return Channel (ARC) Connecting the TV (Audio connection) When another component you wish to connect to the system has an HDMI OUT jack Connecting the other components When the component does not have an HDMI OUT jack Connecting the antenna (aerial) Inserting the wireless transceiver Step 3: Connecting to the Network To set the network settings USB Wireless Setup To set the network settings About wireless LAN security Step 4: Setting up the S-AIR Wireless System Before performing Step 4 1 2 3 Step 5: Performing the Easy Setup 1 2 3 4 5 To recall the Easy Setup Display 3 4 Step 6: Selecting the Source You can select the playback source. Press FUNCTION repeatedly until the desired function appears in the front panel display. Step 7: Enjoying Surround Sound 2 3 4 5 Page Playing a Disc 1 Enjoying BONUSVIEW/BD-LIVE 2 3 Playing from a USB Device 1 2 3 Displaying the play information Enjoying an iPod Compatible iPod models 1 2 3 To operate the iPod using the remote Playing via a Network 1 Common options 2 3 [Video] only [Music] only [Photo] only Page Sound Adjustment Selecting the Effect to Suit the Source Selecting the Audio Format, Multilingual Tracks, or Channel Sound Adjustment Enjoying Multiplex Broadcast Sound (DUAL MONO) Sound Adjustment Using the Sound Effect Changing the tonal balance 2 3 4 Listening to the Radio 1 2 Automatic tuning Manual tuning 5 6 Selecting the preset station 7 8 Using an S-AIR Product About S-AIR products To set the ID of the unit 1 2 4 5 6 8 9 4 5 6 Enjoying the systems sound in another room Enjoying the S-AIR receiver while the unit is in standby mode 1 2 3 4 5 6 3 4 5 6 8 Using the Control for HDMI Function for BRAVIA Sync 1 2 3 To set the [Control for HDMI] function of the system to on/off manually 4 5 6 Turning the system off in sync with the TV Watching BD/DVD by a single button press Calibrating the Appropriate Settings Automatically [Auto Calibration] 3 4 5 Setting the Speakers [Speaker Settings] 3 4 5 A A 1 2 3 4 Using the Sleep Timer To check the remaining time To change the remaining time Deactivating the Buttons on the Unit Controlling Your TV or Other Components with the Supplied Remote 1 button that matches the component you want to control. 2 in the following table. 3 4 5 6 7 3 4 5 6 7 8 Saving Power in Standby Mode Clearing all the preset and programmed remote codes from the remotes memory Using the Setup Display 3 [Remote Controller Setting Guide] Settings and Adjustments [Network Update] [Screen Settings] [Audio Settings] [BD/DVD Viewing Settings] [Parental Control Settings] [Music Settings] [System Settings] [Network Settings] [Easy Setup] [Resetting] Precautions Additional Information On safety On power sources On placement Notes about the Discs On handling discs On cleaning Troubleshooting Picture Power General Sound Page Operation Page USB device S-AIR BRAVIA Internet Video Network connection USB Wireless LAN Adapter Other (BDV-HZ970W only) Playable Discs Discs that cannot be played Notes on discs Note on playback operations of a BD/DVD Note about double-layer BDs/ DVDs Playable Types of Files Video Music Photo Supported Audio Formats Audio formats supported by this system are as follows. a: Supported format. : Unsupported format. Video Output Resolution * Protected contents on DVDs are output at 480p resolution. Specifications Amplifier Section Video Section PB/CB, PR/CR: 0.7 Vp-p 75 ohms HDMI Section BD/DVD/Super Audio CD/CD System Surround (SS-TSB101) for BDV-HZ970W Front/Surround (SS-TSIZ1) for BDV- IZ1000W Center (SS-CTB101) Subwoofer (SS-WSB102) for BDV-HZ970W Subwoofer (SS-WSIZ1) for BDV-IZ1000W Wireless transceiver (EZW-RT10/EZW- RT10A) USB Wireless LAN Adapter (UWA-BR100) Page Glossary Page Page Index Numerics A B C T U W