To cancel pairing

Perform the ID setting of the unit according to the procedure of “To set the ID of the unit” (page 89). If you select a new ID (you can select the same ID as before), pairing is canceled.

If sound transmission is unstable

For the surround amplifier

For the S-AIR receiver

If you use multiple wireless systems which sharing the 2.4 GHz band, such as wireless LAN or Bluetooth, the transmission of S-AIR products or other wireless systems may be unstable. In this case, the transmission may be improved by changing the following [S-AIR RF Change] setting.

1 Press HOME.

The home menu appears on the TV screen.

2 Press C/c to select [Setup].

3 Press X/x to select [System Settings], then press .

4 Press X/x to select [S-AIR RF Change], then press .

5 Press X/x to select the desired setting.

•[Auto]: Normally select this. The system changes the setting to [On] or [Off] automatically.

•[On]: The system transmits sound by searching the better channel for transmitting.

•[Off]: The system transmits sound by fixing the channel for transmitting.

6 Press .

The setting is made.

7 When you set to [Off], select the ID so that sound transmission is most stabilized (page 89).

•In most cases, you will not need to change this setting.

•If [S-AIR RF Change] is set to [Off], transmission between the unit and S-AIR sub unit can be performed using one of the following channels.

–S-AIR ID A: equivalent channel for Wi-Fi channel 1

–S-AIR ID B: equivalent channel for Wi-Fi channel 6

–S-AIR ID C: equivalent channel for Wi-Fi channel 11

•The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s).

94US