7
8
Press 
.
[Auto Calibration] starts.
The system adjust the speaker setting automatically.
Be quiet during the measurement.
Note
•Before [Auto Calibration], make sure that the surround amplifier turns on and you install the surround amplifier in the appropriate location. If you install the surround amplifier in an improper location, such as another room, proper measurement will not be obtained.
•When you use the additional surround amplifier for the surround back speakers (optional), make sure that the additional surround amplifier turns on and you install the additional surround amplifier in the appropriate location.
•Avoid being in the measurement area and making noise during the measurement (about 1 minute), to avoid measurement failure. During the measurement, test signals are output from the speakers.
•The environment of the room in which the system is installed may affect measurements.
•Loud test sound is output when [Auto Calibration] starts. You cannot turn the volume down. Give consideration to children and neighbors.
•If an error message appears, follow the message, then select [OK].
An error message appears when:
–the headphones are connected to the surround amplifier.
–the calibration mic is not connected.
–front speakers are not correctly connected.
–surround speakers are not correctly connected.
–surround back speakers (optional) are not correctly connected.
–subwoofer is not connected.
Confirm the conclusions of [Auto Calibration].
The conclusions appear on the TV screen. Press C/c to change the page. The first page shows the distance of speakers. The second page shows the level of speakers.
Note
•If measurement fails, follow the message then retry [Auto Calibration].
9 Press X/x to select [OK] or [Cancel], then press 
.
xThe measurement is OK.
Disconnect the calibration mic, then select [OK]. The result is implemented.
xThe measurement is not OK.
Follow the message, then select [OK] to retry.
Note
•While the Auto Calibration function works:
–do not turn off the power.
–do not press any button.
–do not change the volume.
–do not change the function.
–do not change the disc.
–do not insert or eject a disc.
–do not connect the headphones to the surround amplifier.
–do not disconnect the calibration mic.
Tip
•You can check the distance between the listening position and each speaker. See page 100.
Operations Other