INSTALLING THE CAMERA

1

Install the Sony BRC700 pan/tilt onto the quick release

2 Place the Sony BRC700 pan/tilt and quick release bracket in

 

bracket using the (2) screws and washers provided with the

the housing, sliding the three open screw slots over the screws

 

camera (Figure 4).

in the housing. Slide the bracket back, then tighten the captive

 

 

screw on the bracket (Figures 5 and 6).

Figure 4

Figure 5

Figure 6

Page 4
Image 4
Sony BRCSDP16 instruction manual Installing the Camera