57
Additional Information
Trouble check
Symptom
Recording stops in a few
seconds.
The cassette cannot be
removed from the holder.
{ and 6 indicators flash and
no function except for cassette
ejection works.
The counter, date or time
indicator is flashing.
The tape does not move when
a video control button is
pressed.
The SteadyShot function does
not activate.
The autofocusing function
does not work.
The fader function does not
activate.
No sound or only a low
sound is heard when playing
back a tape.
Excessive high-pitched sound
is heard.
The date or time indicator
disappears.
Cause and/or Corrective Action
The START/STOP MODE switch is set to 5 SEC or ANTI
GROUND SHOOTING .
mSet it to . (p. 15)
The battery is dead.
mUse a charged battery pack or the AC power adaptor.
(p. 6, 22)
Moisture condensation has occurred.
mRemove the cassette and leave the camcorder for at least
1 hour. (p. 52)
You pressed DATE and TIME together for more than 2
seconds.
mThe camcorder is not malfunctioning. You may start
recording. Flashing will stop soon.
The lithium battery is weak or dead.
mReplace the lithium battery with a new one. (p. 46)
The POWER switch is set to CAMERA or OFF.
mSet it to VTR.
The tape has run out.
mRewind the tape or use a new one. (p. 20)
STEADY SHOT is set to OFF.
mSet STEADY SHOT to ON. (p. 45)
The SteadyShot function does not work when the wide
mode is set to 16:9 FULL.
FOCUS is set to MANUAL.
mSet it to AUTO. (p. 31)
Shooting conditions are not suitable for autofocus.
mSet FOCUS to MANUAL to focus manually. (p. 31)
START/STOP MODE is set to 5 SEC or ANTI GROUND
SHOOTING .
mSet it to . (p. 15)
A title is displayed.
mStop superimposing the title.
The stereo tape is played back with HiFi SOUND set to 1
or 2 in the menu system.
mSet to STEREO in the menu system. (p. 26)
The picture has been recorded with WIND set to ON in the
menu system.
mWhen there is no wind, set it to OFF. (p. 25)
Reset the date and time. (p. 47)
(to be continued)