Using the built-in light
Notes
•The built-in light turns off automatically in the following cases:
–When it stays on in the AUTO mode for more than 5 minutes
–When you leave it on for more than 5 minutes with no cassette inserted or after the tape has run out.
To turn the built-in light on again, press LIGHT again.
•The battery pack is quickly discharging while the built-in light is turned on. Turn it off when not in use.
•When you do not use your camcorder, turn the built-in light off and remove the battery pack to avoid turning on the built-in light accidentally.
•When flickering occurs while shooting in the AUTO mode, press LIGHT until the
indicator appears.
•The built-in light may turn on/off when you use the PROGRAM AE or backlight function while shooting in the AUTO mode.
•The built-in light may be turned off when inserting or ejecting a cassette. •While the end search function is working, the built-in light is turned off.
•When you use the conversion lens (optional), light from the built-in light is blocked and may not illuminate the subject properly.
Replacing the bulb
Use the Sony XB-3D halogen lamp (optional). The supplied halogen lamp is not on the market. Purchase the Sony XB-3D halogen lamp.
Remove the power source before replacing the bulb.
(1) Remove the built-in light unit while pushing the hole under the built-in light unit using a wire.
(2) Turn the bulb housing counterclockwise and detach from the built-in light unit.
(3) Replace the bulb using a dry cloth.
(4) Attach the bulb housing turning it clockwise, then replace the built-in light unit.
1
23