Identifying the parts and controls
Remote Commander
–
The buttons that have the same name on the Remote Commander as on your camcorder function identically to the buttons on your camcorder.
1 |
|
| 4 |
2 | 5 |
| |
3 |
|
1Transmitter
Point toward the remote sensor to control your camcorder after turning on your camcorder.
2Video control buttons (p. 31)
3DISPLAY button (p. 30)
4START/STOP button (p. 20)
5Power zoom button (p. 23)
To prepare the Remote Commander
Insert 2 size AA (R6) batteries by matching the + and – polarities on the batteries to the + – marks inside the battery compartment.
Notes on the Remote Commander
•Point the remote sensor away from strong light sources such as direct sunlight or overhead lighting. Otherwise, the Remote Commander may not function properly.
•Your camcorder works in the commander mode VTR 2. Commander modes
1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid remote control misoperation. If you use another Sony VCR in the commander mode VTR 2, we recommend changing the commander mode or covering the sensor of the VCR with black paper.
78