Trouble check

Symptom

Cause and/or Corrective Actions

Recording stops in a few seconds.

• The START/STOP MODE switch is set to 5SEC or .

 

mSet it to . (p. 16)

 

 

 

 

 

 

The cassette cannot be removed from

• The battery is dead.

the holder.

mUse a charged battery pack or the AC power adaptor.

 

(p. 8, 27)

{and 6indicators flash and no

• Moisture condensation has occurred.

function except for cassette ejection

mRemove the cassette and leave the camcorder for at least

works.

1 hour. (p. 89)

The date or time indicator is flashing. • You pressed DATE and TIME together for more than 2 seconds.

mThe camcorder is not malfunctioning. You may start recording. Flashing will stop soon.

The lithium battery is weak or dead.

mReplace the lithium battery with a new one. (p. 81)

The tape does not move when a

• The POWER switch is set to CAMERA or OFF.

video control button is pressed.

mSet it to VTR.

 

• The tape has run out.

 

mRewind the tape or use a new one. (p. 22)

The Steady Shot function does not

• STEADYSHOT is set to OFF.

activate.

mSet it to ON. (p. 65)

 

• The Steady Shot function does not work when the wide

 

mode is set to 16:9 FULL.

The autofocusing function does not

• FOCUS is set to MANUAL.

work.

mSet it to AUTO. (p. 53)

 

• Shooting conditions are not suitable for autofocus.

 

mSet FOCUS to MANUAL to focus manually. (p. 53)

The fader function does not work.

• The START/STOP MODE switch is set to 5SEC or .

 

mSet it to . (p. 16)

 

 

 

 

 

 

 

• The DIGITAL EFFECT function is working. (CCD-TRV99

 

only)

 

mCansel it.

No sound or only a low sound is

• The stereo tape is played back with HiFi SOUND set to 1

heard when playing back a tape.

or 2 in the menu system.

 

mSet to STEREO in the menu system. (p. 30)

Excessive high-pitched sound is

• The picture has been recorded with WIND set to ON in

heard.

the menu system.

 

mWhen there is no wind, set it to OFF. (p. 30)

Data code becomes “--:--:--”.

• You are playing back a portion of tape on which you

(CCD-TRV99 only)

wrote or erased the index signal. This is not a

 

malfunction. (p. 25)

The date or time indicator

• Reset the date and time. (p. 83)

disappears.

 

 

 

 

 

 

 

 

 

 

 

Picture

Symptom

Cause and/or Corrective Actions

The image on the viewfinder screen

• The viewfinder lens is not adjusted.

is not clear.

mAdjust the viewfinder lens. (p. 13)

 

(to be continued)

information Additional

95