Location and Functions of Parts

ql SHUTTER adjustment section

SHUTTER SPEED/CABLE LENGTH display window

SHUTTER

SHUTTER SPEED/CABLE LENGTH

SHUTTER

OFF

CLEAR SCAN

SHUTTER buttons

SHUTTER switch

SHUTTER switch

Selects whether or not to use electronic shutter. SHUTTER: Turns the normal shutter function on. OFF: Do not use the shutter function.

CLEAR SCAN: Use the clear scan function.

SHUTTER buttons

When the SHUTTER switch is set to CLEAR SCAN or SHUTTER, change the shutter speed or clear scan frequency setting as follows.

When the SHUTTER switch is set to CLEAR SCAN: Change the clear scan frequency while the button is kept pressed. Press the button to increase the frequency and the button to decrease it. Presssing both buttons simultaneously resets clear scan frequency to its factory default value.

When the SHUTTER switch is set to SHUTTER: Change the shutter speed in units of 1 while the button is kept pressed. Press the button to increase the speed and the button to decrease it.

Note

When EVS is set to ON, “EVS” is displayed. When TLCS is set to ON, “----” is displayed. The shutter speed and clear scan frequency cannot be changed in these cases.

For more information about EVS and TLCS settings, see “Changing Settings” on page 26.

SHUTTER SPEED/CABLE LENGTH display window

When the SHUTTER switch is set to CLEAR SCAN or SHUTTER, displays the shutter speed or clear scan frequency. When the SHUTTER switch is set to OFF, displays “OFF”. When the CABLE COMP button (see page 17) is pressed, displays the letter “L” followed by the length of the cable (unit meters).

w; Mode switch

Selects the output signal from this unit.

CAMERA: Camera signal.

BARS: Color bars signal.

wa INTERCOM connector (minijack) and volume knob

Connect a headset such as the DR-100. Adjust the headset speaker volume with the volume knob.

ws POWER switch

Press the “ ” side to power this unit on. To power the unit off, press the “” side of this switch.

20