Recording From CDs
7When you record on side B, reverse the tape and press ·or Pon the player to resume playing.
To cancel Time Edit
Press CONTINUE.
You can program the tracks you want in advance
Select the tracks before doing the above procedure. The player creates a program from the remaining tracks.
You can freely specify the tape length
Set the tape length using the AMS ±control. Example: When the tape length of one side is 30 minutes
and 15 seconds
1To set the minutes, turn AMS ± until “30” appears in the display, then push
AMS ±.
2To set the seconds, turn AMS ±until “15” appears in the display, then push
AMS ±.
You can check and change the program
See page 17.
Fading In or Out
You can manually fade the sound in or out to prevent tracks from starting or ending abruptly.
· P
FADER EDIT/TIME FADE* 0/)
| |
|
|
To | Press FADER |
|
|
Start play fading in | During pause. FADE lights up in |
| the display and the Q indication |
| flashes. The play fades in. |
End play fading out | When you want to start fading out. |
| FADE lights up in the display and |
| the q indication flashes. The play |
| fades out and the player pauses. |
Note
Fading lasts for about 5 seconds. However, when you press the FADER button during Music Scan (see page 12), the play fades out for about 2 seconds.
Fading out at the specified time (Time Fade)You can have the player fade out automatically by specifying the playing time. Once you set the Time Fade, it works twice, that is, the play fades out at the end of both sides of a tape.
1Press EDIT/TIME FADE repeatedly before you
start playing until and “A” in the A indication appear in the display.
2Press 0or )to specify the playing time. Each time you press these buttons, the display changes as shown below, with the playing time of one side following each indication.
n
20