Using the CD display (continued)
To check the remaining time
Press TIME during playback.
Each time you press this button while playing a disc, the display changes as shown in the chart below.
Playingtimeandnumberonthecurrenttrack tRemaining time on the current track t Remaining time on the disc
Notes
•When the disc has more than 24 tracks, “–
•The remaining time on the disc appears only when the disc is played in Continuous Play.
Replacing Discs While
Playing a Disc
You can open the disc tray while playing a disc so that you can check what discs are to be played next and replace discs without interruptingplaybackofthecurrentdisc.
1 Press EX-CHANGE.
The disc tray opens and two disc compartments appear. Even if the player is playing a disc, it doesn’t stop playing.
2 Replace discs in the compartments with new ones.
The player plays the disc on the left side compartmentafterthecurrentdisc,andthen the one on the right side compartment.
3 Press DISC SKIP.
The disc tray turns and other two disc compartmentsappear.
4 Replace discs in the compartments with new ones.
5 Press EX-CHANGE.
The disc tray closes.
While the disc tray is open by pressing the EX-CHANGE button
•If the playback of the current disc ends, the player stops playing. If the disc is played in
1 DISC Repeat Play mode (see page 8), the currentdiscstartsplayingagain.
•In ALL DISCS Shuffle Play mode (see page 8), tracks are reshuffled on the current disc.
•In Program Play mode (see page 11), only the tracks on the current disc are played.