Getting Started

Inserting Batteries Into

the Remote Control

You can control the player using the supplied remote.

Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment.

Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position.

When using the remote, point it at the remote

sensor

on the player.

Tip

When the remote no longer operates the system, replace both batteries with new ones.

Notes

•Do not leave the remote near an extremely hot or humid place.

•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Notice for Custom Integration

•When hooking a cable to an IR IN jack, the IR feature of the Main Unit does not function.

•The disc compartment may close when the unit is being operated from other devices via the IR IN jack while the disc compartment is open.

Notice for connecting an CAV- M1000ES

•Hook up the Audio output jack of this player using the audio cable (supplied). Do not use the digital output (optical) jack.

•Press CONTINUE for PLAY mode. If the Main Unit is set to other than CONTINUE mode, you cannot select a song from a CD or operate the DISC SKIP feature from another device.

The function which does not use the player as a Custom Integration will be mentioned after the above explanation.

Transporting the player

Before transporting the player, follow the procedure below to return the internal mechanisms back to their original position.

1 Remove all the discs from the disc tray.2 Press AOPEN/CLOSE to close the disc tray.

“no dISC” appears in the display.

3 Wait for 10 seconds, then press POWER to turn off the player.

6US