Troubleshooting

If you experience any of the following difficulties while using the player, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer.

There’s no sound.

•Check that the player is connected securely.

•Make sure you operate the amplifier correctly.

•Adjust the analog output level with ANALOG OUT LEVEL +/– on the remote.

The CD does not play.

•There’s no CD inside the player. “no dISC” appears. Insert a CD.

•Place the CD with the label side up on the disc tray correctly.

•Clean the CD (see page 14).

•Moisture has condensed inside the player. Remove the disc and leave the player turned on for about an hour.

•Place the CD in the correct position on the disc tray.

The recording level has changed.

•The recording level changes if you adjust the analog output level with ANALOG OUT LEVEL +/– on the remote during recording.

The remote does not function.

•When hooking the connecting cable to an IR IN jack, this will be operated via the other devices. The IR feature of the Main Unit will not function.

•Remove the obstacles in the path of the remote and the player.

•Point the remote at the remote sensor on the player.

•Replace all the batteries in the remote with new ones if they are weak.

The player functions incorrectly.

•The microcomputer chips may be operating incorrectly. Turn the power off, then turn it back on to reset the player.

Specifications

 

Compact disc player

 

Laser

 

Semiconductor laser (λ =

 

 

780 nm)

 

 

 

Emission duration:

 

 

continuous

 

Frequency response

2 Hz to 20 kHz ± 0.5 dB

Dynamic range

More than 93 dB

Harmonic distortion

Less than 0.0045%

Outputs

 

 

 

 

 

 

 

 

Jack

Maximum

Load

 

type

output level

impedance

 

 

 

 

ANALOG

Phono

2 V

Over 10

OUT

jacks

(at 50 kilohms) kilohms

 

 

 

 

DIGITAL

Optical

–18 dBm

Wave

OUT

output

 

length:

(OPTICAL)

connector

 

660 nm

 

 

 

 

PHONES

Stereo

10 mW

32 ohms

 

phone

 

 

 

jack

 

 

 

 

 

 

General

 

 

 

Power requirements

120 V AC, 60 Hz

Power consumption

11 W

 

Dimensions (approx.)

430 x 110 x 400 mm

(w/h/d)

 

(17 x 4 3/8 x 15 3/4 in.)

 

 

incl. projecting parts

Mass (approx.)

5 kg (11 lbs 1 oz)

Supplied accessories

Audio cord (2 phono plugs – 2 phono plugs) (1) Remote commander (remote) (1)

R6 (size AA) batteries (2)

Design and specifications are subject to change without notice.

Information Additional

15US