Recording From CDs
Recording Your Own Program
You can record the program you’ve created on a tape, etc. The program can contain up to 32 steps.
By inserting a pause during programming, you can divide the program into two for recording on both sides of a tape.
DISC 1 – 5 | P PROGRAM ( |
I / u
1Create your program (for side A when recording on a tape) while checking the total playing time indicated in the display.
Follow Steps 1 through 4 in “Creating a program on the player” on page 13.
The A | indication appears in the display. |
2When you record on both sides of the tape, press Pto insert a pause.
The “PAUSE” and A B indications appear in the display and the playing time is reset to “0.00.” When you record on one side of the tape, skip this step and go to Step 4.
A pause is counted as one step
You can program up to 31 steps when you insert a pause.
3Repeat Steps 2 through 4 in “Creating a program on the player” to create the program for side B.
4Start recording on the deck and then press ((the indicator lights up green) on the player.
When you record on both sides of the tape, the player pauses at the end of the program for side A.
5When you record on side B, reverse the tape and press (or P on the player to resume playing.
You can check and change your program
See page 15.
The A | indication appears while checking the program | |
for side A and | B while checking the program for side | |
B. |
|
|
Fading In or Out Z
You can manually fade the sound in or out to prevent tracks from starting or ending abruptly.
Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector.
FADER
0/) 
To | Press FADER |
Start play fading in | During pause. FADE lights up in |
| the display and the Q indication |
| flashes. The play fades in. |
End play fading out | When you want to start fading out. |
| FADE lights up in the display and |
| the qindication flashes. The play |
| fades out and the player pauses. |
Note
Fading lasts for about 5 seconds. However, when you press the FADER button during Music Scan (see page 11), the play fades out for about 2 seconds.
Changing the fading time
You can change the fading time from 2 to 10 seconds before fading in or out. If you don’t change it, fading lasts for 5 seconds.
1Press FADER before you start playing. “FADE 5 SEC” appears in the display.
2Press 0/)to specify the fading time.
16