Sony CDP-CA80ES Creating a program using the remote Z

Playing CDs

3Press the number buttons of the tracks you want to program in the order you want.

To program, the track numbered over 10, use the >10 button.

Last programmed						Playing order
track
PROGRAM			1	2	3	4		5	A	2		5
DISC											8
		TRACK					STEP		CD1
									Programmed tracks
After one second
PROGRAM	1			2	3	4		5	A	2		5
DISC		TRACK			MIN			SEC			8
									CD1

Total playing time

To make a correction

Press CLEAR, then repeat this step.

4To program other discs or tracks, do the following:

To program	Repeat Step(s)
All tracks on other discs	2
Other tracks on the same disc	3
Other tracks on other discs	2 and 3

5Press ((the indicator lights up green) to start Program Play.

To cancel Program Play

Press CONTINUE.

You can create your program while checking the disc labels

While the disc tray is open, follow Steps 1 to 5 while pressing the DISC SKIP button after each step to check the disc labels. If you close the disc tray before Step 5, the total playing time appears in the display after a while. Note that, if the programmed track number isn’t found on the disc, that step is automatically erased.

The program remains even after the Program Play ends

When you press the (button, you can play the same program again.

The program remains until you erase it or turn off the player

If you replace discs, the programmed disc and track numbers remain. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that aren’t found in the player or on the disc are deleted from the program, and the rest of the program is played in the programmed order.

Note

The total playing time doesn’t appear when:

—You have programmed a track whose number exceeds 20. —The total playing time of the program exceeds 200 minutes.

Creating a program using the remote Z

1Press PROGRAM.

“PROGRAM” appears in the display.

2Press DISC.

PROGRAM	1	2	3	4	5	1	2	3	4	5
						6	7	8	9	10

CD1

3Press the number button of the disc.

PROGRAM	1	2	3	4	5	1	2	3	4	5
						6	7	8	9	10

CD1

4Press ENTER to select the disc.

	1	2	3	4	5
PROGRAM						A	1	2	3	4	5
DISC	TRACK		MIN		SEC		6	7	8	9	10
						CD1

When you want to program the whole disc as one step, skip Steps 5 to 6, and go to Step 7.

5Press =/+until the track number you want appears in the display.

						Track number
	Total playing time					being programmed
PROGRAM	1	2	3	4	5	A	2		5
DISC	TRACK		MIN		SEC			8
						CD1

14