4Push AMS ±to select the track.
Last programmed Playing order track
PROGRAM | 1 | 2 | 3 | 4 | 5 | 2 | 5 |
|
|
|
|
|
| A | 8 |
DISC | TRACK |
|
| STEP |
|
| |
|
|
|
|
|
1 5 3
Programmed tracks
After one second
PROGRAM | 1 | 2 | 3 | 4 | 5 | 2 | 5 |
|
|
|
|
|
| A | 8 |
DISC | TRACK |
| MIN |
| SEC |
| |
|
|
|
|
1513
18
Total playing time
If you’ve made a mistake
Press CLEAR, then repeat Steps 3 and 4.
5To program other discs or tracks, do the following:
To program | Repeat Step(s) |
|
|
Other discs | 2 |
|
|
Other tracks on the same disc | 3 and 4 |
|
|
Other tracks on other discs | 2 through 4 |
|
|
6Press ·to start Program Play.
To cancel Program Play
Press CONTINUE.
You can create your program while checking the disc labels
While the disc tray is open, follow Steps 1 to 6 with pressing the DISC SKIP button to check the disc labels. If you close the disc tray before Step 6, the total playing time appears in the display after a while.
Note that, if the programmed track number isn’t found on the disc, that step is automatically erased.
The program remains even after the Program Play ends
When you press the ·button, you can play the same program again.
Playing CDs
The program remains until you erase it or turn off the player
If you replace discs, the programmed disc and track numbers remain. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that aren’t found in the player or on the disc are deleted from the program, and the rest of the program is played in the programmed order.
Note
The total playing time doesn’t appear when:
Checking the track order
You can check your program before or after you start playing.
Press CHECK.
Each time you press this button, the display shows the track (the disc and track numbers) or the disc (the disc number and “AL” indication) of each step in the programmed order. After the last step in the program, the display shows “End” and returns to the original display. If you check the order after you start playing, the display shows only the remaining steps.
Changing the track order
You can change your program before you start playing.
To | You need to |
|
|
Erase a track | Press CHECK until the track |
| you don’t want appears in |
| the display, then press |
| CLEAR |
|
|
Erase the last track in the | Press CLEAR. Each time you |
program | press the button, the last |
| track will be cleared. |
|
|
Add tracks to the end of the | Follow Steps 2 through 4 of |
program | the programming procedure |
|
|
Change the whole program | Hold down CLEAR until |
completely | “ALL CLr” appears in the |
| display. Create a new |
| program following the |
| programming procedure. |
|
|