Playing CDs
6To program other discs/tracks, do the following:
To program | Repeat Steps |
|
|
All tracks of another disc(s) | 2 to 4 |
|
|
Other tracks on the same disc | 5 |
|
|
Other tracks on other discs | 2 to 5 |
|
|
7Press ·to start Program Play.
To cancel Program Play
Press CONTINUE.
Checking the programmed order
You can check your program before or after you start playing.
Press CHECK.
Each time you press this button, the display shows the disc and track number of each step in the programmed order. (When a whole disc is programmed as one step, “ALL” appears instead of the track number.) After the last step in the program, the display shows “– END
Changing the programmed order
You can change your program before you start playing.
To | You need to |
|
|
Erase a track or disc | Press CHECK until the track or |
| disc you do not want appears in |
| the display, then press CLEAR |
|
|
Erase the last track or disc in the program
Press CLEAR. Each time you press the button, the last track or disc will be cleared.
Add tracks or discs to the | Follow the programming |
end of the program | procedure |
|
|
Change the whole | Hold down CLEAR until |
program completely | “CLEAR” appears in the display |
| to erase the whole program, then |
| create a new program following |
| the programming procedure |
|
|
Erasing the program stored in memory
1Press PROGRAM repeatedly in the stop mode until the program number (PROGRAM 1, 2 or 3) you want to erase appears in the display.
2Hold down CLEAR until “CLEAR” appears in the display.