Playing CDs
Playing all tracks on a specified disc in random order
1Press SHUFFLE twice.
“1 DISC” and “SHUFFLE” appear in the display.
2Turn the JOG dial until the disc number you want appears in the display.
When using the remote, press DISC first and then press the number button of the disc.
3Push the JOG dial or press ·.
When using the remote, press ENTER.
1 DISC Shuffle Play starts.
“ 
” appears in the display while the player is “shuffling” the tracks.
To cancel Shuffle Play
Press CONTINUE.
You can start Shuffle Play while playing
Press SHUFFLE, and Shuffle Play starts from the current track.
You can directly select a disc for 1 DISC Shuffle Play 
See “Selecting a disc directly using the remote” on page 14.
You can go to the next disc during 1 DISC Shuffle Play 
Press DISC SKIP +.
You can specify the next disc to play during 1 DISC Shuffle Play
Turn the JOG dial to specify the next disc. After all the tracks on the current disc are played in random order, the next disc starts playing. If you want to skip to the next disc right away, push the JOG dial while playing the current disc.
Notes
•You cannot specify the next disc to play during ALL DISCS Shuffle Play.
•Even if you press por turn off the player during ALL DISCS Shuffle Play, the player remembers which discs/ tracks were played and which were not. Therefore, if you want to start ALL DISCS Shuffle Play again from the beginning, be sure to repeat the procedure from Step 1.
Creating Your Own Program (Program Play)
You can arrange the order of the tracks and/or discs to create three different programs and programs are stored automatically. A program can contain up to 32 “steps” — one “step” may contain a track or a whole disc.
You can make programs using the controls on the remote as well as ones on the player. However, the programming procedures are different.
Creating a program on the player
PROGRAM /± |
| JOG CHECK | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
· CLEAR
1Press PROGRAM until the program number you want (PROGRAM 1, 2 or 3) appears in the display. If a program is already stored in the selected program number, the last step of the program appears in the display. When you want to erase the whole program, hold down CLEAR until “CLEAR” appears in the display (see page 19).
2Turn the JOG dial until the disc number you want appears in the display.
PROGRAM1 | CD1 | 2 0 |
|
|
DISC
* D I S C - 2 0 *
3To program a whole disc, skip this step. Press /±until the track number you want appears in the display.
PROGRAM1 | CD1 | 2 0 |
| ||
|
| |
DISC | TRACK | STEP |
2 0 | 3 | 1 |
|
|
|
Track number
(Continued)
17