Getting Started
Unpacking
Check that you received the following items:
•Audio cord (1)
•Monaural (2P)
•Remote commander (remote) (1)
•Size AA (R6) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote. Insert two size AA (R6) batteries (supplied) by matching the + and – ends on the batteries to the diagram inside the battery compartment.
Insert the negative
When using the remote, point it at the remote sensor on the player.
zWhen to replace batteries
With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones.
Notes
•Do not leave the remote near an extremely hot or humid place.
•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
•Do not expose the remote sensor to direct sunlight or leave too near lighting apparatuses. Doing so may cause a malfunction.
•If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
Hooking Up the System
Overview
This section describes how to hook up the CD player to an amplifier. Be sure to turn off the power of each component before making the connections.
|
|
| DIGITAL OUT | ||
CONTROL A1 | (OPTICAL) | ||||
|
|
| CD player | ||
|
|
|
|
|
|
|
|
|
|
|
|
To an AC outlet
To line output (L) | To line output (R) |
To audio input | Amplifier |
: Signal flowTo an AC outlet
What cords will I need?
Audio cord (supplied) (1)
White | White |
(L) | (L) |
Red | Red |
(R) | (R) |
4