Other Functions
Adjusting the sound characteristics
Level | Digital | Level | |
|
| ||
|
| ||
|
| ||
0dB |
| 0dB |
Frequency (Hz)
Adjusting the bass curve
Analog
Frequency (Hz)
You can adjust bass, treble, balance and fader. Each source can store the bass and treble level independently.
1 Select the item you want to adjust by pressing (SEL) repeatedly.
VOL (volume) nBAS (bass) nTRE (treble)
nBALANCE (balance) nFADER (fader)
2 Adjust the selected item by pressing (+) or (Ð).
EN Adjust within three seconds after selecting the item. (After three seconds, the buttons work as volume control buttons.)
Turn the
During CD playback, “DIGITAL
To cancel, turn the dial to the OFF position.
Muting the beep tone
Press (6) while pressing (SEL).
To obtain the beep tone again, press these buttons again.
Note
If you connect an optional power amplifier and do not use the
Muting the sound
Press (MUTE). “MUTE” flashes.
To restore the previous volume level, press (MUTE) again.
Changing the sound and beep tone
Boosting the bass sound — D.bass
You can enjoy clear and powerful bass sound. The
You can hear the bass line more clearly even if the vocal sound is the same volume. You can emphasize and adjust the bass sound easily with the
Moreover, the Digital
8 | * Digital |
|
Turning on the clock
display — Power Select Function
Only for cars with an accessory position on the ignition key switch
To turn the Power Select Function ON
Press (OFF) while pressing (SEL). The Power Select Function ties the clock display power to the accessory position on the ignition key switch.
To avoid battery wear, the clock is not displayed while the unit is initializing.
Note
You cannot operate this function with the optional rotary remote
Actual total number: | Sony |
|
|
