Note
You cannot use this function in some countries where no PTY (Programme Type selection) data is available.
1 Press (PTY) during FM reception until “PTY” appears.
PT INFO
The current programme type name appears if the station is transmitting PTY data.
“- - - -
2 Press (PTY) repeatedly until the desired programme type appears.
The programme types appear in the order shown in the above table. Note that you cannot select “NONE” (Not specified) for searching.
PT SPORT
3 Press either side of (SEEK/AMS). The unit starts searching for a station broadcasting the selected programme type. When the unit finds the programme, the programme type appears again for five seconds.
“NO” and the programme type appear alternately for five seconds if the unit cannot find the programme type. It then returns to the previous station.
Setting the clock automatically
The CT (Clock Time) data from the RDS transmission sets the clock automatically.
During FM reception, press (2) while pressing (SEL).
“CT” is displayed, and the clock is set.
FM1 | 100 |
CT |
To cancel the CT function
Repeat the above procedure.
Notes
•The CT function may not work even though an RDS station is being received.
•There might be a difference between the time set by the CT function and the actual time.
EN
RDS
13