Other Functions

You can connect an optional rotary commander (RM-X4S) with this unit.

Using the rotary commander

The rotary commander works by pressing buttons and/or rotating controls.

By pressing buttons (the SOURCE and MODE buttons)

(SOURCE)

EN

(MODE)

Each time you press (SOURCE), the source changes as follows:

TUNER ˜CD

Pressing (MODE) changes the operation in the following ways;

Tuner: FM1 nFM2 nFM3 nMW nLW

Tip

When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander.

By rotating the control (the SEEK/ AMS control)
Rotate the control momentarily and release it to:

•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in stations automatically. Rotate and hold the control to tune in a specific station.

By pushing in and rotating the control (the PRESET/DISC control)

Push in and rotate the control to: Receive the stations memorised on the number buttons.

14