Changing the operative direction
The operative direction of controls is factory- set as in the illustration below.
To increase
To decrease
If you need to mount the rotary commander on the right side of the steering column, you can reverse the operative direction.
EN
Press (SOUND) for two seconds while pushing the VOL control.
Adjusting the sound characteristicsYou can adjust bass, treble, balance and fader. Each source can store the bass and treble level independently.
1 Select the item you want to adjust by pressing (SOUND) repeatedly.
VOL (volume) nBAS (bass) nTRE (treble)
nBAL
2 Adjust the selected item by rotating the dial.
Adjust within three seconds after selecting the item. (After three seconds, the dial functions as volume control.)
Changing the sound and beep tone
Boosting the bass sound — D.bass
You can enjoy clear and powerful bass sound. The
You can hear the bass line more clearly even if the vocal sound is the same volume. You can emphasize and adjust the bass sound easily with the
Moreover, the Digital
*Digital
|
| Digital |
|
| Analog |
Level |
| Level |
| ||
|
| ||||
|
|
|
| ||
|
|
|
| ||
0dB |
|
| 0dB |
|
|
|
| Frequency (Hz) |
|
| Frequency (Hz) |
|
|
|
|
Adjusting the bass curve
Turn the D-BASS dial to adjust the bass level (1, 2 or 3).
During CD playback, “DIGITAL
To cancel, turn the dial to the OFF position.
Note
The bass sound becomes distorted, adjust the D- bass dial or volume control.
Attenuating the beep tone
Press (6) while pressing (SOUND).
To obtain the beep tone again, press these buttons again.
Note
If you connect an optional power amplifier and do not use the
10