Getting Started
Resetting the unit
Before operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press the reset button with a pointed object, such as a
Notes
•Be sure not to drop the panel when detaching it from the unit.
•If you press (RELEASE) to detach the panel while the unit is still on, the unit will turn off automatically to prevent the speakers from being damaged.
•When you carry the front panel with you, put it in the supplied front panel case.
Attaching the front panel
Align part A of the front panel to part B of the unit as illustrated, and push until it clicks.
Reset button
Notes
• Pressing the reset button will erase all the |
memorized program and memory functions. |
• When you connect the power supply cord to the |
unit or reset the unit, wait for about 10 seconds |
before you insert a disc. Do not insert a disc |
B
Notes
A
EN
within these 10 seconds, otherwise, the unit will |
not be reset, and you will have to press the reset |
button again. |
Detaching the front panel
You can detach the front panel of this unit to prevent the unit from being stolen.
1 Press (OFF).
2 Press (RELEASE) to open up the front panel. Then slide the front panel a little to the left, and pull it off towards you.
(OFF)
(RELEASE)
•Be sure not to attach the front panel upside down.
•Do not press the front panel hard against the unit when attaching it. Press it lightly against the unit.
•Do not press hard or put excessive pressure on the display window of the front panel.
•Do not expose the front panel to direct sunlight, heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight where there may be a considerable rise in temperature.
Caution alarm
If you turn the ignition key switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds. If you connect an optional power amplifier and do not use the
Started Getting
5