GETTING TO KNOW YOUR BAGLESS BAGLESS

OPERATING INSTRUCTIONS

UPRIGHT

1.

Handle

9.

Handle Release Pedal

2.

Telescopic Handle

10.

Cord Rewind Button

3.

Telescopic Tube Height

11.

Hose Intake

 

Adjustment Button

12.

Flexible Hose

4.

On/Off Button

13.

Power Cord Clip

5.

Dust Cup Release Button

14.

Telescopic Tube Release Button

6.

Dust Cup (Container)

15.

Crevice Tool

7.

Carpet Height Adjustment Knob

16.

Dusting Brush

8.

Motorized Power Head

17.

Power Cord

 

 

18.

Hose Connector

Technical Specifications

5.Carefully clear away any excess dust or debris from agitator.

6.Remove agitator from housing starting on the left side followed by the right side.

7.If the belt has broken, remove any loose pieces before replacing with a new belt.

8.Remove the worn or broken belt from the motor drive shaft.

9.Loop the new belt first over the drive shaft then over agitator into the groove on the right side of the agitator. (Fig. 11)

10.Insert the right side of the agitator by placing the end cap down into the slot on the housing and then align the left side. Press down firmly to make sure that each end of the agitator is correctly fitted into the slots.

Motor

Belt

Agitator

Fig. 11

NOTE: There will be some tension on the belt as the agitator is being put into place.

11.Make sure that the belt is centered on the pulley and the agitator turns.

12.Replace the front end of the top cover ensuring the wheel hubs fit properly in place. (Fig 12)

13.Lift handle to secure top cover over carpet height selector.

14.Drop handle so that the vacuum is laying flat again. Holding the top and bottom of unit gently turn unit over and replace the screws. Do not turn the screws too tightly to avoid stripping the screw holes.

Storage

To store the vacuum cleaner, put it in the upright position. Turn the power “Off”. Remove the power cord from the electrical outlet. Press the cord rewind button. If the cord does not fully retract, pull it out again and then press on cord rewind button.

Warning: Hold the plug when rewinding the cord. Do not allow the cord to whip when rewinding.

Note: Before using the appliance, unwind a sufficient length of cable and Insert the plug into the wall socket. A yellow mark on the power cord shows the ideal cable length. Don’t pull the power cord beyond the red mark.

Motor Thermostat

Important: This unit is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur:

•Push the On/Off button once.

•Disconnect the plug from the power source.

•Check the source of overheating problem. (i.e. clogged hose or filter)

•If clogged hose or filter is found, unclog the hose and replace the filters.

•Wait at least 45 minutes before attempting to reuse the vacuum.

•After unit has cooled down for 45 minutes, plug in the cleaner and push the On/Off button. The vacuum should start again.

•If the vacuum still does not start, contact customer service at

1 (800) 798-7398.

Voltage:

120V., 60Hz.

Power:

12 Amps

Note: Illustrations may differ from actual unit.

Fig. 12

Wheel Hub

3

8

Page 3 Page 5
Page 4
Image 4
Euro-Pro V1055H owner manual Storage, Motor Thermostat
Page 3 Page 5

V1055H specifications

The Euro-Pro V1055H is a versatile and innovative home appliance designed to simplify household cleaning tasks while enhancing user convenience. This powerful vacuum cleaner stands out with its advanced features and technologies, making it a top choice for those seeking efficiency and ease of use.

At the core of the Euro-Pro V1055H is its high-performance motor, which provides strong suction power, effectively picking up dirt, debris, and allergens from various surfaces. This model is equipped with a multi-surface cleaning capability, enabling it to transition seamlessly from carpets to hard floors, ensuring a thorough clean no matter the floor type.

One of the standout characteristics of the V1055H is its bagless design, which not only reduces ongoing maintenance costs but also makes it easy to empty the dirt canister. The transparent dust container allows users to see when it needs to be emptied, taking the guesswork out of cleaning. This model also features a HEPA filtration system, which captures 99.97% of dust mites, pollen, and other allergens, making it an excellent choice for allergy sufferers.

The Euro-Pro V1055H is designed with user-friendliness in mind. Its lightweight construction allows for easy maneuverability throughout the home, while the ergonomic handle provides comfort during extended cleaning sessions. Additionally, the vacuum is equipped with swivel steering, allowing users to navigate around furniture and tight spaces effortlessly.

Another notable feature is the variety of attachments that come with the V1055H. Included are a crevice tool for reaching narrow spaces, a dusting brush for delicate surfaces, and an upholstery nozzle to tackle furniture and drapery cleaning. This versatility makes it a full-service cleaning solution for any household.

The Euro-Pro V1055H also incorporates innovative technologies that enhance performance. Its auto-rewind cord feature ensures that the cord retracts automatically after use, preventing tangling and creating a tidier storage experience. Moreover, the vacuum’s quiet operation allows for cleaning without disturbing family members or pets.

In summary, the Euro-Pro V1055H is a feature-rich vacuum cleaner that combines powerful suction, efficient filtration, and user-friendly design. Its bagless technology and diverse attachments make it a practical choice for a range of cleaning needs, all while providing a quieter and more convenient cleaning experience. With this vacuum, users can achieve a cleaner home with minimal effort, enjoying the benefits of advanced cleaning technology in their daily routine.
Top Page Image Contents