Sharp MD-X60H Continued, Error messages, Meaning, Remedy, Blank Md, Cant COPY, Cant EDIT, Defect

YO <P=001>

(Continued)

When an error message is displayed, proceed as follows:

	Error messages	Meaning	Remedy
	BLANK MD	● Nothing is recorded.	● Replace it with another disc.
	Can't COPY	● You tried to record from a copy-protected disc.	● Replace it with a regular disc that can be copied.
	Can't EDIT	● A track cannot be edited.	● Change the stop position of the track and then try editing
			it.
	Can't REC	● Recording cannot be performed correctly due to vibra-	● Re-record.
		tion or shock in the unit.
	Can't T REC	● Timer recording is impossible or there is no available	● Replace it with another disc.
		space on the MD.
	CH ERROR	● There is something wrong with the CD changer.	● Set this unit to the stand-by mode and then back to on,
			and press the 0 6 button.
	CONNECT ERR	● Whilst an MD player is being edited on this unit, incorrect	● Make sure the cable is connected correctly and that
		digital signals are input from the portable MD player.	power is being supplied to the portable MD player.
	DEFECT	● Since this disc has scratches on it, the recording oper-	● Replace it with another disc.
		ation was skipped.
	Din UNLOCK	● Incorrect digital signals are input.	● Connect correct digital signals.
			● Use the analogue input sockets.
	DISC ERR	● The disc is damaged.	● Reload the disc or replace it.
		● A TOC is not written on the MD or there is something
		wrong with data.
	DISC FULL	● The disc is out of recording space.	● Replace the disc with another recordable disc.
	EDIT OVER	● There is no space to make CD editing on the disc.	● Replace it with a disc that has enough time to record.
	FOCUS ERROR	● A disc has not been loaded.	● Reload the MiniDisc.
		● The disc data cannot be read.
	MD ERROR	● No operation.	● Contact the shop where you purchased the unit.
	∗	● There is a mechanical problem and the disc is not work-	● Set this unit to the stand-by mode and press the	7	but-
	MECHA ERR	ing properly.
	∗		ton.
	( :Number or
	symbol)
	NAME FULL	● The number of characters for the disc name or track	● Shorten the disc or track name.
		name exceeds 100.
	NO DISC	● A disc has not been loaded.	● Load a disc.
		● The disc data cannot be read.	● Reload the disc.
	NOT AUDIO	● The data recorded on this disc is not audio data.	● Select another track.
			● Replace the disc.
	PLAYBACK MD	● You tried to record on a playback-only disc.	● Replace it with another recordable disc.
	PROTECT	● Trouble is found.	● Restart the unit. If the unit doesn't work, contact a
			SHARP Authorised Servicing Dealer or SHARP Auth-
			orised Service station.
	PROTECTED	● The disc is write protected.	● Move the write protection tab back to its original position.
		● The tape is protected against accidental erasure.	● Cover the accidental erase prevention hole.
	TAPE ERROR	● The tape mechanism is defective.	● Try pressing the RESET button.
	TEMP OVER	● The temperature is too high.	● Set this unit to the stand-by mode and wait for a while.
	∗	● The disc is damaged.	● Replace it with another disc.
	TOC ERR
	(∗:Number or	● TOC information cannot be read.
	symbol)	● MD not specified.
	∗	● There is no space left for recording character information	● Replace it with another recordable disc.
	TOC FULL	(track names, disc names, etc.).
	(∗:Number or
	symbol)
	TOC W ERROR	● Recording is impossible.	● Contact the shop where you purchased the unit.
	TRAY ERROR	● The CD tray operates incorrectly.	● Unplug the AC power lead, plug it back, and then turn
			the power on.
	U TOC ERR∗	● TOC information recorded on the MD does not match	● Replace it with another disc.
	(∗:Symbol)	the MD specifications or it cannot be read.	● Erase all of the track, and try recording.
	U TOC W ERR	● The TOC information could not be created properly due	● Set this unit to the stand-by mode and try to write the
		to a mechanical shock or to scratches on the disc.	TOC again.
			(Remove any source of shock or vibration whilst writing.)
	? DISC	● The data contains an error.	● Replace it with another disc.
00:00		● Music is not being recorded.	● Replace the disc with another recordable disc.

53

MD-X60H(SUK) TINSE0227AWZZ