Sound Control, Display Section | Sharp MD-X60H manual

<P=005>

SOUND CONTROL

(Main unit)

(Remote control)

0 - 40

Press the VOLUME button to increase the volume and the VOLUME but- ton to decrease the volume.

●The volume display can be changed within the range of "0" to "40".

(Main unit)

(Remote control)

(Main unit)

(Remote control)

When the PRE-EQ button is pressed, the current mode setting will be displayed. To change to a different mode, press the PRE-EQ button repeatedly.

FLAT HEAVY-2 HEAVY-1

SOFT-1 SOFT-2 VOCAL

Press the X-BASS button to emphasise the bass region of the frequency spectrum. "X-BASS ON" will appear.

Press the X-BASS button again to cancel the extra bass mode. "X-BASS OFF" will appear.

You can change the brightness of the display.

When the power is on, press the DISPLAY button for at least two seconds.

●The display section will become brighter.

To return to the original brightness, press the DISPLAY button again for at least two seconds.

Note:

●The brightness setting of the display is maintained even after the unit has entered stand-by mode.

	Caution:	● If TV or radio interference occurs during CD operation, move the
	● Do not carry the unit whilst CDs are in the trays or a MiniDisc is
	loaded. The discs may come loose inside the unit and they may	unit away from the TV or radio.
	be damaged or cause damage to the unit. This may also cause	● If a disc is damaged, dirty, or loaded upside down, the disc will be
	malfunctions.	skipped and the next disc will automatically play.
	● Do not place two CDs in one disc position.	● If the CDs are dirty or have label adhesive on their surface, make
	● Do not push the disc tray whilst it is moving.	sure to clean them before loading.
	● Do not attempt to push the disc tray by hand. This may cause	● If the CD 0 6 button, any of the CD 1 0 - 3 0 buttons or the
	malfunctions.	7 button is pressed when a disc tray is open, the disc tray will
	● If the power fails whilst the tray is open, wait until the power is	close automatically. Be careful not to catch your fingers.
		● If the unit is shaken by impact or vibration, playback may be dis-
	restored.
	● If the disc tray is stopped forcibly, "DISC ERR" will appear in the	rupted. If the playback volume of a CD is raised excessively, play-
		back may be disrupted. If this occurs, lower the playback volume.
	display and the unit will not function.
	display and the unit will not function.
	If this occurs, press the ON/STAND-BY button to enter the stand-by
	mode and turn it on again.

MD-X60H(SUK) TINSE0227AWZZ